Furniture drawer Offroad 4x4 sliding, to put a fridge, use camp kitchen and put gas barbecue , made of aluminum .

Ideal for off-road vehicles, vans for use 4x4 ,The Overland, the RV...

• Weight: 31 kg
• Outside Closed: 900 x 535 x 190mm
• Fully extended: 2495 x 535 x 190 mm
• Sliding tray holder for fridgeThe following: 865 x 490 mm
• Multi-purpose bench/table: 850 x 495 mm
• Barbecue bench/ cooking table: 750 x 450 mm
• Installation of the camp kitchen
• 3 wind deflector components, turnable from left to right
• 4 extendable leg bases, maximum height 110cm
• Mounting accessories
• 4 M bolts10 x 55 mm
• 4 flat washers M10
• 4 Nyloc M10 nuts

The ideal kitchen station for the chef on the road
Designed to fit most 4x4, vans and vans, the kitchen has a large cooking area, sliding refrigerator extendable with differential locker, food preparation area and space to fit most 2-burner stoves with a reversible wind cover to retain constant cooking heat under all conditions. The kitchen for camping Offroad 4x4 it is made of a strong powder coated aluminum alloy and has telescopic legs so that the kitchen can be used on uneven surfaces. Once you've finished using it, the stove can be folded down perfectly to 900 mm so you have plenty of room in the back of your vehicle.

Attention

• Heavy objects: Seek help from a second person before lifting and always practice safe hand handling techniques.
• Use appropriate hand and foot protection when moving or handling the camp kitchen system.
• Ensure that appropriate mounting fittings are used at all 4 corners of the camp kitchen mounting system (min. 8 mm in diameter, at least.
grade 5 bolts, hardened panel washers under the vehicle). All hardware must be tightened before use and periodically checked.
• Not suitable for applications where, if installed, the position of child restraint systems is affected.
• Do not use the loading mooring points of the camp kitchen system as anchorage points for child restraint seats.
• Always use straps and anchorages of appropriate classification to secure the load on the drawer system.
• If mounting a load on top of the drawer system, ensure that the vehicle is equipped with a load barrier of appropriate classification.
• Not suitable for applications where, if installed, the position of the mounting points of the load barrier is affected.
• Keep children away from drawers and drawers when opening or closing them.
• Make sure that all sliding/mobile components and removable parts are tightly closed and locked before moving the vehicle.
• When the vehicle is parked on a slope, use extreme caution when opening or closing the camp kitchen by sliding/moving
components
• You may need to slide components during installation, make sure the camp kitchen is properly supported or secured
fall during this operation.

Location:

1. Assess the rear loading area of your vehicle to determine the
the most appropriate location to secure the mounting points.
On most wagons, the factory mooring hooks can be removed
and used for a safe fit using factory bolts.

To ensure optimal fit, measure the distances between
all assembly points. These measures will be used to:
place the mounting rails at the bottom of the drawers.
required for the camp kitchen to sit directly inside the vehicle

Remove all drawers one at a time by moving them completely.
extending and then pressing down the blue tubes of differential locker
on every side. Move the drawers to a safe place outside
the work area

With the drawers removed, you can now work to secure the
mounting rails to suit your vehicle. Loosen the clamping screws
and move the rails to the required position.

5. Before installing the main system cabinet, make sure that
the mounting surface and areas under the carpet are free from any
wires, bolts or fasteners.

Move the cabinet to the loading area and place it up
the bolt holes ready for installation. Make sure the unit is
properly placed in the loading area, the rear doors are closed
and the drawers can be opened completely. Use a solution of differential locker of yarn
and tighten all the bolts.

Reinstall the drawers. Inspect the system thoroughly to make sure
everything works smoothly and