






Inverter with pure sine wave 1500W
12VDC Pure sinusoidal wave input Output from 220AC
Peak power 3000W
Frequency 50 ± 0,5 Hz.
Input is DC 12DC.
Input voltage DC9.5V-15.0V.
Conversion rate ≥ 90%
0 the charging current consumes 0,75 A.
For the purpose of this Regulation, the following definitions shall apply: 0.5V.
Protection of alto in the case of vehicles of categories M1 and N2 0.5V.
High temperature protection: 85 degrees ± 5%
If the vehicle is equipped with an electrical connector, it shall be capable of operating at a voltage not exceeding 1500 V.
Starting mode: soft start.
Including LCD Display.
The malfunction code says yes.
Size: 19.2X26X9.6cm.
Low voltage protection.
Heat shielding.
Protection from overload.
Input for short-circuit protection
Plastic body
Specific References